PWM Fans | JMC Products

Pulse Width Modulated DC Fans

Application of PWM Speed Control

JMC offers a host of high frequency Pulse Width Modulated (PWM) fans that perform at low noise levelsApplication of PWM Speed Control by eliminating the power switching noise of the fan. The motor commutation noise is eliminated with high frequency PWM as the coils of the fan are being switched with a frequency above 20 kHz, which is outside the human audible range.

The speed of the fan is controlled by an external PWM signal. The JMC PWM ramps up linearly from a 20% duty cycle up to the fan’s maximum rated speed.

All fan sizes are in millimeters (“mm”).
Also available in 24 and 48 Volts
FV – Fixed Vane style
CR – Counter Rotating dual fans
Data table reflects HIGH speed PWM Fans
All performance figures are at nominal voltage

PART NUMBER	FAN SIZE	VOLTAGE (Vdc)	SPEED (RPM)	AIR (CFM)	NOISE (dBA)	PRESSURE (in. H20)	CURRENT (A)	POWER (W)	BEARING TYPES	OTHER VOLTS
03000B0004	30x30x10	10.8-13.2	11000	5.14	30.7	0.19	0.11	1.32	B/SSB
03001B0004	30x30x15	10.8-13.2	12200	4.36	34.9	0.21	0.09	1.08	B
03601B0004	36x36x28 FV	10.8-13.2	21000	20	61.2	1.7	1.1	13.2	B
03800B0004	38x38x28	10.8-13.2	10000	10	38	0.33	0.30	3.6	B	5, 24
03801B0004	38x28x28FV	10.8-13.2	23000	21.98	58.2	2.63	0.65	7.8	B
04000B0004	40x40x10	10.8-13.2	9000	9.92	36	0.27	0.1	1.2	B/SSB	5
04009B0004	40x40x15	10.8-13.2	9000	11.16	31.2	0.44	0.12	1.44	B/SSB	5
04001B0004	40x40x20	10.8-13.2	9000	9	35	0.32	0.12	1.44	B/SSB	5
04002B0004	40x40x25	10.8-13.2	10000	11	40.6	0.48	0.2	2.4	B/SSB	5, 24
04003B0004	40x40x28	10.8-13.2	20000	23.71	55.7	1.5	0.94	11.28	B
04004B0004	40x40x28 FV	10.8-12.6	20000	30	61	2.1	0.94	11.28	B
04006B0004	40x50x32 CR	10.8-13.2	10500	19.0	42.1	0.67	0.43	5.16	B
04007B0004	40x50x38 CR	10.8-13.2	10200	22.4	56	0.6	0.75	9	B
04005B0004	40x40x56 CR	10.8-12.6	20000	40	68	3.4	3.1	37.2	B
04008B0004	40x40x20 Blower	10.8-13.2	6000	2.50	32.1	0.28	0.08	0.96	B	5
05001B0004	50x50x15	10.8-13.2	7000	17.23	38	0.25	0.25	3.00	B/SSB	5
05004B0004	50x50x15 Blower	10.8-13.2	5500	3.39	41.9	0.65	0.12	1.44	B	5
05005B0004	50x50x20 Blower	10.8-13.2	5700	7.14	34.9	0.8	0.12	1.44	B/SSB	5
05003B0004	50x50x25	10.8-13.2	5500	16.55	33.4	0.17	0.15	1.80	B/SSB	5, 24, 48
05700B0004	57x57x28 Blower	10.8-13.2	5000	4.2	32.2	0.21	0.13	1.56	B	5
06000B0004	60x60x10	10.8-13.2	4800	19.72	35.2	0.1	0.15	1.8	B/SSB
06001B0004	60x60x15	10.8-13.2	6500	29,85	43.6	0.42	0.34	4.08	B	5, 24
06003B0004	60x60x25	10.8-13.2	7500	37.28	45.3	0.52	0.46	5.52	B	24
06006B0004	60x60x38 FV	10.8-13.2	16500	71.99	67.7	3.12	2.30	27.60	B	24,48
06005B0004	60x60x15 Blower	10.8-13.2	5100	5.4	42	0.45	0.12	1.44	B	5
07001B0000	70x70x15	10.8-13.2	5200	39.3	45	0.38	0.55	6.6	B	24
07001B0004	70x70x25	10.8-13.2	5000	42.7	42.8	0.35	0.4	4.8	B	24
07001B0004	74x74x30 Blower	10.8-13.2	5500	15.2	50.8	0.92	0.65	7.8	B	24,48
08000B0004	80x80x15	10.8-13.2	4800	47.13	47.4	0.26	0.45	5.4	B/SSB	24
08002B0004	80x80x25	10.8-13.2	5000	54.1	47.1	0.35	0.55	6.6	B	24,48
08004B0004	80x80x32	10.8-12.6	6500	54	47	0.81	0.5	6	B	24
08003B0004	80x80x38 FV	10.8-13.2	8000	115	64.5	1.14	2.2	26.4	B	24,48
09200B0004	92x92x25	10.8-13.2	4000	82	45	0.27	0.55	6.6	B	24,48
09201B0004	92x92x32	10.8-13.2	5700	113.16	52.8	0.79	0.92	11.04	B	24,48
09202B0004	92x92x38	10.8-13.2	6400	134.5	57.9	0.98	1.36	16.32	B	24,48
09203B0004	92x92x38 FV	10.8-13.2	7900	169.35	66	1.56	2.30	27.6	B	24,48
09700B0004	97x94x33 Blower	10.8-13.2	5500	39.54	63.2	2.63	1.39	16.68	B	24,48
12000B0004	120x120x25	10.8-13.2	3800	144.91	55.5	0.41	1.6	19.2	B	24,48
12002B0004	120x120x38	10.8-13.2	4150	148	53	0.5	1.4	16.8	B	24,48
12003B0004	120x120x38 FV	10.8-13.2	4500	197.73	63.0	0.84	2.6	31.20	B	24,48
14000B0004	140x140x38 FV	10.8-12.6	5400	280	62	1.42	2.6	31.2	B	24,48
17200B0004	171x152x51	10.8-13.2	5000	348.18	65.6	1.30	2.5	30	B	24,48

All product specifications found herein are for informational purposes only and are subject to change without notice. While JMC has made every effort to provide current and accurate information, JMC is not responsible for, and shall be held harmless from, any reliance made on such product specifications or for any inaccuracies contained within. Please contact JMC at 800-580-6688 for a current product drawing and specification sheet assigned to meet the needs of your specific thermal cooling application.